Getting Started

Start the paired beacons from the box, then pair your phone from any beacon in the system.

Video Guide

Shows how to start the boxed system, bring the rest of the beacons online, and get ready to choose a mode.

Beacons in the same box arrive paired as one system.
Turn on one beacon first and wait until it flashes white, then turn on the rest.
You can add more beacons later, or split some beacons into a separate system and pair them back again later.
The side LED normally shows that beacon’s player color. While the menu is open, it shows which beacon is currently acting as Leader or Follower.

On any joined beacon, press and hold the side/menu button for about 2 seconds, then release to enter the menu.
Short press side/menu until you reach Page 7, Pairing.
Press Primary/Top. A green spinning animation means the system is ready for a new phone.
Open Connect, choose the system with the pairing-window badge while the green animation is active, and wait for the app to trust it.

To split off a new group, choose one beacon for that group, enter the menu, go to Page 6, and press Primary/Top until it is set as Leader.
Short press side/menu to move that beacon to Page 7 and leave it there so its pairing window stays open.
On each beacon you want in that new group, enter the menu, set Page 6 to Follower, then go to Page 7 so it can join.
Joined beacons turn teal/green when pairing succeeds. You can repeat the same process later to pair the group back into the larger system.

Tell us if this article helped, or what is wrong or missing.