Skip to content
Nexus Workshop Nexus Prop Controller Guides

RFID Tag Sets

RFID Tag Sets give human-readable names to raw tag UID values or allow for storing IDs into Data Blocks to create recognizable tags.

Display prerequisite

This section appears after at least one RFID reader module is configured in Configure > Connections > Inputs, Outputs, and Modules.

UI path

  1. Add RFID reader hardware in Configuration > Connections > Inputs, Outputs, and Modules.
  2. Open Configuration > Definitions.
  3. Expand RFID Tag Sets.
  4. Click Add RFID Tag Set.
  5. Add each Tag you’d like to define.
  6. Read or enter tag values.
  7. Assign friendly tag names.
  8. Use tag names in Action Triggers, Logic Rules, or Collections.

Additionally you can use the Data Block mode and choose a block to store data in. You can then use the Write function to store that data onto the presented tag and you can make multiple copies of a tag that react identically this way.