DMX Lighting

DMX Lighting controls fixtures, dimmers, and devices that use DMX channels.

Display prerequisite

DMX Lighting, DMX Scenes, and DMX Live appear after at least one DMX-capable module is configured in Configure > Connections > Inputs, Outputs, and Modules.

UI path

1. Open Configuration.
2. Select Lighting.
3. Expand DMX Lighting.
4. Add fixture profiles.
5. Add fixtures and set start addresses.
6. Use Auto Layout if useful.
7. Create DMX groups and scenes.
8. Use Scene Builder to edit fixture attributes.
9. Import fixture profiles if needed.
10. Trigger scenes from Behavior.

Controls

Control	What it does
+ Add Profile	Creates a channel profile for a fixture type
DMX Mode	Chooses LTP or HTP output behavior
+ Add Fixture	Patches a fixture into the DMX universe
Start at	Suggested starting channel for layout
Auto Layout	Assigns fixture start channels automatically
+ Add Scene	Creates saved DMX channel values
Default Scene	Scene used as the default active look
Scene Builder	Edits scenes by fixture attributes instead of raw channels
Import Profiles	Imports JSON profile arrays
Import OFL JSON	Imports Open Fixture Library JSON profiles

Check fixture start addresses carefully. DMX problems are usually profile length, start-channel, or patch mismatches.